The throttle connects to channel (3)

The auxiliary connects to GYRO channel (5)

For calibration, use a spare model. Set the model type [TYP] to [AERO] .

Note: If there is no spare model, you can use any channel for calibration as long as the EPA is +/-100%.

The auxiliary channel is assigned to the RETRACT/GEAR switch in AERO mode.

Endpoint setup [EPA]

Setup the throttle servo and linkage as close to +/- 100% EPA as possible.

Select the GEAR channel and set the [EPA] to +100% and -100%

The system is now ready for calibration. Calibration Procedure

Now return to the original model [HELI]

The target rotor speed can be calculated using the EPA Calculator

 

Example : Flight Mode Mixing:

Select the [GYR] menu

Set F-Mode N to 0%

Set F-Mode 1 to 42% (1200rpm @ 9.3:1)

Set F-Mode 2 to 74% (1500rpm @ 9.3:1)

Set F-Mode 3 (Throttle Hold) to 0%

 

Yeilds the following setup:

Flight Mode        Rotor RPM

N                       Disabled

1                        1200rpm

2                       1500rpm

3 (throttle hold) Disabled